Egyptian Dental Journal - Articles List

Keywords = CAD%2FCAM

Influence of Preparation Design on Fracture Resistance of Hybrid Ceramics Occlusal Veneer

Volume 70, Issue 2, April 2024, Pages 1421-1430

Ahmed Kamal Mohamed; mohamed gamal Hussein; Moustafa Sherief Mohamed; Cherif Adel Mohsen

NON-INVASIVE DIGITAL TECHNIQUE FOR EXAMINATION OF MARGINAL AND INTERNAL ADAPTATION OF DIFFERENT CERAMIC TABLE-TOPS

Volume 70, Issue 2, April 2024, Pages 1515-1528

Rewaa G. Aboelhassan; Dina M. Nasr

The Biaxial Flexural Strength and Weibull Analysis of Polished and Glazed CAD/CAM Polymethylmethacrylate Provisional Material..

Volume 70, Issue 1, January 2024, Pages 413-420

Soha Osama

Evaluation of Marginal Adaptation of Different Materials and Thicknesses of CAD/CAM Fabricated Occlusal Veneers

Volume 70, Issue 1, January 2024, Pages 437-449

Samar Saeed Bedair; Ghada Ahmed Elzayat; Zainab Diaa Soliman

Three Years Clinical Evaluation of Lithium Disilicate and Hybrid Nano-ceramic CAD/CAM Endocrowns (Randomized Clinical Trial)

Volume 70, Issue 1, January 2024, Pages 551-561

Marwa Ayman Salem; Shereen Hafez Ibrahim; Sameh Sherif Abou-steit

Impact of Various Lining Materials on Fracture Resistance of CAD/CAM Fabricated Ceramic Onlays Subjected to Thermo-mechanical Cyclic Loading

Volume 69, Issue 4, October 2023, Pages 3119-3130

Mohamed Abd-Almohaimen; Ali Atef; Ashraf Ibrahim Ali; Salah Mahmoud

Impact of Different Surface Treatments on Bond Strength of CAD/CAM Fabricated Y-TZP Ceramic Onlays Subjected to Thermo-mechanical Cyclic Loading

Volume 69, Issue 4, October 2023, Pages 3277-3290

Noor Abed; Ali Atef; Ashraf Ibrahim Ali Ibrahim; Salah Mahmoud

FRACTURE RESISTANCE OF FOUR DIFFERENT TYPES OF CAD/CAM LITHIUM DISILICATE ENDOCROWNS

Volume 69, Issue 2, April 2023, Pages 1493-1500

Amr Shebl kassem; Mohammed Mohammad; tarek abd elhamid

FATIGUE RESISTANCE, FRACTURE STRENGTH AND MARGINAL INTEGRITY OF THREE TYPES OF CAD/CAM HYBRID CERAMIC CROWNS

Volume 69, Issue 1, January 2023, Pages 523-531

aya abd elkader el-aidy; Amr Shebl kassem; Mosaad Elgabrouny; tarek abd elhamid

ASSESSMENT OF INTERNNAL ADAPTATION OF CAD CAM ALL CERAMIC CROWNS WITH TWO DIFFERENT MARGIN DESIGNS

Volume 69, Issue 1, January 2023, Pages 583-592

Omayma Sayed; Amr Elbolok; Shams Amgad

Evaluating The Stresses Induced by Pekkton® and Zirconia Primary Coping on The Supporting Structures of Mandibular Telescopic Partial Denture (An in vitro study)

Volume 68, Issue 4, October 2022, Pages 3467-3473

shima mohamed; NORA sheta

Influence of Food Simulating Fluids and Thermocycling on Surface Roughness and Wear Resistance of Dental Composite Restoratives.

Volume 68, Issue 4, October 2022, Pages 3989-3998

Rania Mubarak

EVALUATION OF THE INTERNAL FIT OF PRESSABLE VERSUS CAD/CAM PEEK POST AND CORE USING SCANNING ELECTRON MICROSCOPE: AN IN VITRO STUDY

Volume 68, Issue 4, October 2022, Pages 3671-3682

Shaimaa Naddar; Iman Hamdy; Maha Taymour

Effect of intra-chamber extension of lithium disilicate endocrowns on the fracture resistance and failure modes in endodontically treated molars (In-Vitro study)

Volume 68, Issue 4, October 2022, Pages 3725-3732

Nader EL Mankabady; Atef Ibrahim; Carl Halim

Internal fit and marginal adaptation of CAD/CAM lithium disilicate endocrowns fabricated with conventional impression and digital scanning protocols. An in-vitro study

Volume 68, Issue 4, October 2022, Pages 3793-3808

Hanaa Nassar

Effect of nanoparticles on surface roughness of digitally and conventionally constructed RPD framework

Volume 68, Issue 2, April 2022, Pages 1731-1739

ENAS DARWISH; mai helmy

Effect of air abrasion pressure and CAD/CAM milling on microtensile bond strength of reinforced composite inlays to immediately sealed dentin: An invitro comparative study

Volume 68, Issue 1, January 2022, Pages 995-1002

Mai Akah; Eman Yousef

CAD/CAM Fabrication of a Patient-specific PEEK Implant for Marginal Mandibular Reconstruction: A Technical Report

Volume 68, Issue 1, January 2022, Pages 783-786

Mohamed Said; Mohamed Shady; Mohamed Elmetwally; Marco Youssef; Salah Hegazy

Effect of Different Techniques of CAD/CAM Designed BioHpp Frameworks on The Supporting Structures of Kennedy Class I Telescopic Partial Denture Cases

Volume 67, Issue 4, October 2021, Pages 3393-3402

HEBA ELSARRIF; Shaimaa Mohamed; Marwa Sabet

Peri-implant marginal bone height changes in implant-retained overdentures constructed by CAD/CAM or conventional processing technique- A one-year clinical follow-up.

Volume 67, Issue 3, July 2021, Pages 2357-2366

Nasser Hussein Shaheen; Mahmoud Darwish Aly

Effect of Alkaline peroxide denture cleansers on surface roughness and hardness of Conventional heat cured and CAD/CAM denture base resins.

Volume 67, Issue 3, July 2021, Pages 2431-2441

Mahmoud Darwish Aly

Fracture incidence in implant-retained mandibular overdenture constructed by either conventional method or CAD/CAM technology- A one year follow up.

Volume 67, Issue 2, April 2021, Pages 1417-1422

Mahmoud Aly

Wear, Microhardness and Fracture Toughness of Different CAD/CAM Ceramics

Volume 67, Issue 1 - January (Fixed Prosthodontics, Removable Prosthodontics and Dental Materials), January 2021, Pages 485-495

Rasha Sayed Asaad; Shereen Salem

Effect of Artificially Accelerated Ageing and Different Mouth Rinses on Color Stability of Veneered PEEK Crowns

Volume 67, Issue 1 - January (Fixed Prosthodontics, Removable Prosthodontics and Dental Materials), January 2021, Pages 497-507

Ahmed Ziada; Marwa Beleidy

Marginal Accuracy and Fracture Resistance of Posterior Crowns Fabricated from CAD/CAM PEEK Cores Veneered with HIPC or Nanohybrid Conventional Composite

Volume 66, Issue 4 - October (Fixed Prosthodontics, Removable Prosthodontics and Dental Materials), October 2020, Pages 2541-2552

Marwa Beleidy; Ahmed Ziada

Journal Archive

Volume 70 (2024)

Volume 69 (2023)

Volume 68 (2022)

Volume 67 (2021)

Volume 66 (2020)

Volume 65 (2019)

Volume 64 (2018)

Volume 63 (2017)

Volume 62 (2016)