Egyptian Dental Journal - Articles List

Volume & Issue: Volume 68, Issue 4, October 2022, Pages 3411-3856 (October (Fixed Prosthodontics, Removable Prosthodontics and Dental Materials))

Main Subjects

Conservative Dentistry 2

Dental Materials 7

Fixed Prosthodontics 15

Removable Prosthodontics 20

PIEZOELECTRIC REPEATED SCALING EFFECT ON MARGINAL LEAKAGE OF TWO DIFFERENT CEMENTED CERAMIC CROWNS

Pages 3411-3420

Magdy Mandour; Mohammed Shalaby; Reem Gamal

Comparing changes of retention between milled zirconia and Polyetheretherketon (PEEK) framework on telescopic implant retained overdenture: An invitro study

Pages 3421-3430

Nora sheta; Nouran Abdel Nabi

Digital evaluation of a simplified technique for resin splinting used for multiunit implant restoration impressions: An in-vitro comparative study

Pages 3431-3441

Sherif El-Dakkak; Akram Fathy Neena

VERTICAL MARGINAL GAP ASSESSMENT OF CAD ON VENEERED PEKK CROWNS VERSUS CAD ON VENEERED ZIRCONIA CROWNS (A Randomized in vitro study)

Pages 3443-3454

Nada Fahmy; Hesham Katamish; Reham Elbasty; Mohamed Abbas

COMPARISON OF THE FRACTURE RESISTANCE BETWEEN INLAY RETAINED FIXED PARTIAL DENTURES FABRICATED FROM MILLED PEEK (BIOHPP) AND MONOLITHIC ZIRCONIA (In vitro study)

Pages 3455-3465

Hesham Mostafa; noha El-khodary; Rasha sami

Evaluating The Stresses Induced by Pekkton® and Zirconia Primary Coping on The Supporting Structures of Mandibular Telescopic Partial Denture (An in vitro study)

Pages 3467-3473

shima mohamed; NORA sheta

Evaluation of Denture Adhesive versus Single Implant on Complete Denture Retention and Patient Satisfaction

Pages 3475-3486

Ahmed Alam-Eldein

Evaluation of margin and internal fit of full arch metal coping fabricated using computer aided milling, direct laser sintering, and traditional casting technique

Pages 3487-3494

Ehab A. Farghaly; Mohammad Rayyan

EVALUATION OF FRACTURE RESISTANCE OF 3D-PRINTED IMPLANT RETAINED OVERDENTURE WITH TWO DIFFERENT BUILD ANGLES. (AN IN-VITRO STUDY )

Pages 3495-3502

Mona Awajah; Nadia Abbas; Reham Osman

The effect of Titanium dioxide nanoparticles incorporation in overdenture on the preservation of the gingival health of the abutment

Pages 3503-3509

Noha Aligamaleldin; Hany Mohamed Khattab

Patients’ satisfaction and quality of life with complete dentures constructed by various clinicians. A cross-sectional study.

Pages 3511-3517

Seham Mohamed

Effect of staining solutions on color and translucency change of different monolithic CAD-CAM ceramic materials

Pages 3519-3530

Ahmed Arafa; Mazen Attia

Effect of different partial denture designs in mandibular distal extension cases on bacterial growth (A Randomized Clinical Trial)

Pages 3531-3536

ENAS DARWISH

Marginal Fit of PMMA CAD/CAM Crowns Fabricated by using Photogrammetry Scanning method. (an invitro study)

Pages 3537-3544

mostafa kamel; Ali elkady; lomaya Ghanem

Prevalence and pattern of partial edentulism among Egyptian patients. An observational cross-sectional study.

Pages 3545-3551

Mohamed Sharaf; ahmed Elhagali; ahmed Elbakery

Effect of different ceramic materials on debonding time with dentin using Er, Cr:YSGG laser

Pages 3553-3558

Ahmed Abdelkhalek; Marwa Wahsh; Hoda Abdel sadek

Fracture resistance of different zirconium dioxide three-unit fixed dental prostheses

Pages 3559-3564

Abeer Atout

Two-Body Wear and Surface Roughness of CAD/CAM Esthetic Monolithic Block Materials using Chewing Simulation against Enamel Antagonists

Pages 3565-3578

Hadil Sabry; Nehal Abouraya

Comparative study of candida albicans adherence to conventional acrylic denture base materials and injection molding acrylic materials and poly ether ether ketone

Pages 3579-3585

reham sharabasy; Mai Esam Ahmed; ebtehal Mohammed

Fracture resistance of endodontically treated premolars restored with lithium disilicate crowns retained with fiber posts compared to lithium disilicate and PEEK endocrowns (An in vitro study)

Pages 3587-3607

Sherif Leon; Iman Salah; Carl Halim

Direct pick-up versus indirect pick-up technique for 4- implants retained single maxillary overdentures with bar attachment: Clinical evaluation.

Pages 3609-3618

ENAS DARWISH; mai helmy

DIGITAL OCCLUSAL ANALYSIS, PATIENT SATISFACTION AND PROSTHODONTIC MAINTENANCE OF MINI-IMPLANT VERSUS STANDARD DIAMETER IMPLANT OVERDENTURES: A TWO-YEAR FOLLOW-UP STUDY

Pages 3619-3635

Yasser Shawky; Hana Youssef

Effect of different lithium silicate ceramics with variable shades, thickness and curing modes on the degree of conversion of resin cement

Pages 3637-3645

nermeen nagi

Effect of Different Shading Techniques on Color, Translucency and Flexural Strength of Zirconia Ceramic after Aging

Pages 3647-3658

Mohamed Gamal Elbadry; Cherif Mohsen; Raessa Hashem

Influence Of Different Implant Abutment Connection On Fatigue Life Of Bone In Edentulous Hemimandibulectomy Cases Restored By Implant Supported Overdenture. A Finite Element Analysis

Pages 3659-3669

Reem Eldien Gamal; Amr Mohamed Ismail Badr; Emad Mohammed Agamy

EVALUATION OF THE INTERNAL FIT OF PRESSABLE VERSUS CAD/CAM PEEK POST AND CORE USING SCANNING ELECTRON MICROSCOPE: AN IN VITRO STUDY

Pages 3671-3682

Shaimaa Naddar; Iman Hamdy; Maha Taymour

REPERCUSSION OF 2 DESIGNS OF LINGUALIZED OCCLUSAL SCHEMES ON EMG ACTIVITY MUSCLES IN MANDIBULAR IMPLANT SUPPORTED OVERDENTURE RANDOMIZED CONTROLLED CLINICAL STUDY

Pages 3683-3690

Nancy EL Sherbini; mai helmy

Post-gel shrinkage strain and degree of conversion of nanohybrid resin composite containing graphene oxide nanoparticles

Pages 3691-3699

Wael Mohamed Gamal; Ahmed Magdy Sayed

Can Omnichroma revoke other restorative composites? Mechanical and physical assessment of Omnichroma dental resin restorative composite: An In- vitro study.

Pages 3701-3716

Dina El- Refai

Radiographic evaluation of crestal bone loss around one- piece versus two-piece implant with bar retaining mandibular overdenture. (A Randomized clinical trial)

Pages 3717-3724

amr Badr; Mohamed Zaki

Effect of intra-chamber extension of lithium disilicate endocrowns on the fracture resistance and failure modes in endodontically treated molars (In-Vitro study)

Pages 3725-3732

Nader EL Mankabady; Atef Ibrahim; Carl Halim

The effect of incorporating graphene oxide nanoparticles within self-etch adhesive on the antibacterial properties and shear bond strength

Pages 3733-3740

Wael Gamal; Shaimaa Ahmed Alrafee; Ahmed Sayed

Clinical, Radiographic, and Prosthetic Outcomes of Poly Ether Ether Ketone (PEEK) Versus Poly Ether Ketone Ketone (PEKK) Frameworks in Mandibular Fixed-Detachable Implant-Supported Prosthesis: A Randomized Clinical Trial

Pages 3741-3759

Iman El-asfahani; amr Badr

Color Stability of three esthetic monolithic block materials after immersion in commonly consumed beverages

Pages 3761-3770

Nehal Lotfy Abouraya; Hadil Sabry

Evaluation of metal base adaptation and clinical retention of upper complete dentures with a CO-CR metal palate constructed by two different approaches.

Pages 3771-3782

eman mohammed; enas elddamony; Sara Mohamed

The impact of application mode of three universal adhesives with different chemical compositions and curing techniques on their micro shear bond strength to dentin

Pages 3783-3791

Mohamed Kamel; Mennatallah Mehena; Zainab Soliman

Internal fit and marginal adaptation of CAD/CAM lithium disilicate endocrowns fabricated with conventional impression and digital scanning protocols. An in-vitro study

Pages 3793-3808

Hanaa Nassar

STRAINS INDUCED BY ZIRCONIA AND METAL RESIN BONDED ATTACHMENTS VERSUS EXTRACORONAL ATTACHMENT WITH FULL VENEER RETAINER IN MAXILLARY DISTAL EXTENSION REMOVABLE PARTIAL DENTURES

Pages 3809-3822

Rehab Al Aswad; Hanaa G. Youssef

Periodontal Health and Marginal Bone Height Change around Abutments in Zirconia versus Cobalt-Chromium Bar Retained Mandibular Tooth Supported Overdenture: A Randomized Controlled Clinical Trial

Pages 3823-3834

Iman El-asfahani; Rehab Al Aswad

ACCURACY OF CONVENTIONAL AND DIGITAL IMPRESSIONS AT DIFFERENT SPAN LENGTHS OF MISSING TEETH (COMPARITIVE IN-VITRO STUDY)

Pages 3835-3848

Nada El-Sheikh; Rana Sherif; Mostafa Kamel

A CBCT evaluation of marginal bone loss in two vs. four Implants-bar supported mandibular overdenture: Randomized Clinical Trials

Pages 3849-3856

Ramy Ali; Inass AbuElmagd; Amr Gomaa

Egyptian Dental Journal

Journal Archive

Volume 70 (2024)

Volume 69 (2023)

Volume 68 (2022)

October (Orthodontics, Pediatric & Preventive Dentistry)

Issue 4 - October (Oral Surgery)

October (Oral Medicine, X-Ray, Oral Biology & Oral Pathology)

October (Fixed Prosthodontics, Removable Prosthodontics and Dental Materials)

October (Conservative Dentistry and Endodontics)

July (Orthodontics, Pediatric & Preventive Dentistry)

Issue 3 - ِJuly (Oral Surgery)

Issue 3 - July (Oral Medicine, X-Ray, Oral Biology & Oral Pathology)

July (Fixed Prosthodontics, Removable Prosthodontics and Dental Materials)

July (Conservative Dentistry and Endodontics)

April (Orthodontics, Pediatric & Preventive Dentistry)

April Oral Surgery

April (Oral Medicine, X-Ray, Oral Biology & Oral Pathology)

Fixed Prosthodontics, Removable Prosthodontics and Dental Materials

Conservative Dentistry and Endodontics

January (Orthodontics, Pediatric & Preventive Dentistry)

January (Oral Surgery)

January (Oral Medicine, X-Ray, Oral Biology & Oral Pathology)

January (Fixed Prosthodontics, Removable Prosthodontics and Dental Materials)

January (Conservative Dentistry and Endodontics)

Volume 67 (2021)

Volume 66 (2020)

Volume 65 (2019)

Volume 64 (2018)

Volume 63 (2017)

Volume 62 (2016)