Egyptian Dental Journal - Articles List

Volume & Issue: Volume 70, Issue 2 - Serial Number 4, April 2024, Pages 1421-1835 (Fixed Prosthodontics, Removable Prosthodontics and Dental Materials)

Main Subjects

Conservative Dentistry 1

Dental Materials 2

Fixed Prosthodontics 22

Oral and Maxillofacial Radiology 1

Orthodontics 1

Removable Prosthodontics 15

Influence of Preparation Design on Fracture Resistance of Hybrid Ceramics Occlusal Veneer

Pages 1421-1430

Ahmed Kamal Mohamed; mohamed gamal Hussein; Moustafa Sherief Mohamed; Cherif Adel Mohsen

Evaluation of Tearing Strength and Anti-Microbial Property of Self-Disinfectant Alginate versus Conventional Alginate

Pages 1431-1444

moamen ahmed abd elrazik; Mahmoud Hassan El Afandy; Marwa Kothayer

Effect of Finishing Technique on Color Stability of Dental Ceramics

Pages 1445-1452

Aliaa Ali Al-Qousy; Moustafa Sherief Mohamed; mohamed gamal Hussein; Cherif Adel Mohsen

Evaluation of the push out bond strength of fiber post system and PolyEtherEtherKetone (PEEK) post after different surface treatments. (An Invitro study)

Pages 1453-1464

Eslam Mostafa Abd El-gawad; Cherif Adel Mohsen; Amna Taha Mohammed

CLINICAL EVALUATION OF FULL DIGITAL WORKFLOW TO PROVIDE A PREFABRICATED IMMEDIATE RESTORATION AFTER SINGLE-IMPLANT PLACEMENT

Pages 1465-1475

Haitham Ahmed Ismail; muhamed badee El-Danasory; Yasmin Ashor Tahmawy; Naema Ammar; Mohamed Moataz Khamis; Ahmed M Abdelhamid; Mariam M. Bahgat

EVALUATION OF SHEAR BOND STRENGTH OF MULTILAYERED ZIRCONIA AND LITHIUM DISILICATE CERAMIC TO RESIN CEMENT

Pages 1477-1488

Rana Khaled Ahmed; Mohammed Moustafa Shalaby; Raiesa Mohamed Hashem

The Effect of Heat Treatment and Surface Energy Alteration on Controlling the Long Term Stability of the Zirconia-Resin Bond

Pages 1489-1502

Abeer Taha M. Rashad; shams waz; Hanaa Saber Rabeae

Influence of Reinforcement with Silicon Dioxide Nanoparticles on The Fracture Strength and Surface Roughness of Implant-Retained Mandibular Overdenture: An In Vitro Comparative Study

Pages 1503-1513

safaa Salah Ali; Sherief M. Abdelhamid; Mostafa El_-Sayed Abd El-haleem; Iman A El-asfahani

NON-INVASIVE DIGITAL TECHNIQUE FOR EXAMINATION OF MARGINAL AND INTERNAL ADAPTATION OF DIFFERENT CERAMIC TABLE-TOPS

Pages 1515-1528

Rewaa G. Aboelhassan; Dina M. Nasr

The influence of air abrasion and Er,Cr:YSGG laser on shear bond strength of cubic zirconia to two resin cement types.

Pages 1529-1535

Amira Said Abd Elsabour; Tarek Salah; Soha Osama

Evaluation of color change and surface roughness for two indirect esthetic materials submitted to different immersion protocol.

Pages 1537-1545

Asmaa Fathy Mohamed; Shamss Wazz; Reem Gamal

Fracture Resistance of Interim Restoration Constructed by 3D Printing versus CAD/CAM Technique in Different Oral Media (In Vitro Study)

Pages 1547-1555

abdelrahman rashad mohamed; Omaima El mahallawy; Raiesa Mohamed Hashem

Effect of Copper Oxide Nanoparticles Incorporation on the Mechanical and Surface Properties of Heat Polymerized Denture Base Resin: An In Vitro Study.

Pages 1557-1565

Enas ElSayed Mesallum

Effect of layer thickness, inner structure, and implant angulation on the accuracy of 3D printed models with implant analogs

Pages 1567-1575

Ingy Nouh; Nancy Rafla; Omar Ahmed El Sergany

MARGINAL FIT AND FRACTURE RESISTANCE EVALUATION OF INLAY RETAINED FIXED PARTIAL DENTURE WITH TWO DIFFERENT CAVITY DESIGNS

Pages 1577-1585

Doaa Ali Ahmed; Shereen Kotb Salem; Raiesa Mohamed Hashem

Evaluation Of The Effect Of Different Surface Treatments On Micro Tensile Bond Strength And Color Stability Of Hybrid Ceramic Repaired With Composite

Pages 1587-1597

Alaa Samir Ibrahim; shams waz; Hanaa Saber Rabeae

Effect of different Extra coronal attachment designs on the biological consideration and bacterial growth in mandibular Kennedy class II cases (A Randomized Clinical Trial)

Pages 1599-1608

Mai Adel Helmy; Safaa Kamel; Marwa Kothayer

Assessment of ceramic repressing effect on color and translucency of pressable ceramic materials

Pages 1609-1620

Sara Hassan Mohamed; Shams Waaz Amgad; Ahmed Mohamed Bakry

Effect of Different Denture base Materials on Stresses Transmitted to supporting structures of Implant-supported Mandibular Overdenture

Pages 1621-1628

Ahmed Abdelwahed Shaaban

Evaluation of motility of solid versus hollowed ocular prosthesis. A double blinded cross over randomized clinical trial

Pages 1629-1635

abdelrhman hassan mahmoud; doaa tawfik hassan; Emad Mohammed Agamy

Effect of different types of reinforcement denture base materials on implants retained overdenture

Pages 1637-1649

May Mahmoud Hassan; Heba Abd Elrahman Elbelacy

Retention And Functionality Assessment for Two Design of Interim Maxillary Obturator

Pages 1651-1659

Mohamed Denewar; Ahmed Khalifa

Comparing the effect of canine guided versus group function occlusion on the vertical bone loss around implants retaining mandibular hybrid prostheses

Pages 1661-1670

nour magdy kodera; Ahmed mohamed osama ahmed shawky; Dina Essam Bahig

Comparative Evaluation of Candida Albicans Adherence, Flexural strength and Water Sorption of Orthodontic Self-Cure Acrylic Resin Modified with 2-Methacryloyloxyethyl Phosphorylcholine by Two Different Techniques: in-vitro Study

Pages 1671-1681

Tayseer Maaly; mahmoud Ashraf; Marwa Aly Tawfik

Comparative stress analysis study between different coping materials in complete overdenture cases (An in-vitro study)

Pages 1683-1691

Sahar Ahmed Ghorab; Mohamed Zawahry; Engy Hussein Mahmoud

Laser Micromachining of Titanium Aluminum Vanadium Alloy Rods

Pages 1693-1698

Mohamed Ahmed Alkhodary

Comparison of three different dental implant biological coating techniques

Pages 1699-1703

Mohamed Ahmed Alkhodary

Effect of Repolishing on Color Stability of Hybrid Ceramics after Immersion in Chlorhexidine Mouth Rinse

Pages 1705-1713

Rawan Ahmed Rabiee; Waleed Mohamed Elshahawy; Abeer Atef Younes

ASSEMENT OF FRACTURE RESITANCE OF THERMOCYCLED AND NON THERMOCYCLED ENDOCROWN AND POST CROWN FABRICATED ON MAXILLARY PREMOLAR USING VITA ENAMIC. IN VITRO STUDY AND FINITE ELMENT ANALYSIS

Pages 1715-1726

Nesma Mahmoud Essa; Manal Rafei Hassan Abu-Eittah

The Influence of Different Surface Treatments on Bond strength of CAD/CAM Fabricated Ceramic Restorations

Pages 1727-1739

Shaimaa Ahmed Abo El-Farag

Hardness and elastic modulus properties of PEEK material as an alternative to Poly Methyl Metha Acrylate (in- vitro study)

Pages 1741-1747

mohamed quassem; mamdouh mansour; wesam elsayed badr; mohamed sayed etman; belal alwakeel; faried hamam

The Impact of Different Preparation Designs on Marginal Adaptation of Pressable Ceramics (An In-vitro Study)

Pages 1749-1759

Mohammed Deeb; Enas Fathelbab Abdelhalim; Hanaa Saber Rabeae

Marginal Integrity of Different CAD/CAM Monolithic Ceramic Crowns with Vertical and Horizontal Finish Line Preparations

Pages 1761-1759

Shereen Kotb Salem; Rasha Sayed Asaad

In-Vitro Evaluation of Strain Induced by Various Extra Coronal Attachment Materials in Removable Partial Dentures Restoring Mandibular Kennedy Class I Following Clinical Simulation for One Year

Pages 1771-1790

Yasser Mohamad Shawky

Comparison of peri-implant bone level in mandibular implant overdenture retained by locator attachment with varying retentive insert materials: A retrospective study

Pages 1791-1796

Mohamed Said

Fracture resistance of bi-layered and translucent zirconia after thermo-mechanical fatigue

Pages 1797-1811

Abdulmoein Ahmad Alzhairi; Ahmed Hamdy; mai hesham abdelrahman; Faisal safwat Hamza

Comparing the fracture resistance of three different CAD/CAM occlusal veneers manufactured with different thicknesses. An in vitro study.

Pages 1813-1826

Zainab Diaa Soliman; Samar Saeed Bedair

Influence of Thickness of Endocrown and Ceramic Translucency on The Degree of Conversion of Resin Cement (In Vitro Study)

Pages 1827-1835

Sara Shoukri Mousa Bih; Maged Zohdy; Sara Mehanna Foudah; Engy Adel Ahmed Farag

Journal Archive

Volume 70 (2024)

Issue 2

April (Orthodontics, Pediatric & Preventive Dentistry)

Issue 2

April Oral Surgery

Issue 2

April (Oral Medicine, X-Ray, Oral Biology & Oral Pathology)

Issue 2

Fixed Prosthodontics, Removable Prosthodontics and Dental Materials

Issue 2

Conservative Dentistry and Endodontics

Issue 1

Issue 1 - January (Orthodontics, Pediatric & Preventive Dentistry)

Issue 1

January (Oral Surgery)

Issue 1

January (Oral Medicine, X-Ray, Oral Biology & Oral Pathology)

Issue 1

January (Fixed Prosthodontics, Removable Prosthodontics and Dental Materials)

Issue 1

January (Conservative Dentistry and Endodontics)

Volume 69 (2023)

Volume 68 (2022)

Volume 67 (2021)

Volume 66 (2020)

Volume 65 (2019)

Volume 64 (2018)

Volume 63 (2017)

Volume 62 (2016)